Palladium-carbon catalyst
| Metal content: 0.5%-10% |
Carrier: high purity active carbon |
Specific surface are: 1000-1500m2/g |
| Granularity: ≤200meshes(adjust according to specific conditions) |
Metal surface area: 55-70m2/g |
| Strength of particles: ≥85% |
Impurities: Fe, Cu, Ni, Ca etc. ≤0.3% |
| Nitro hydrogenation rate: (0.15M, 35°C, 1atm) (7%pd/c≥95ml/0.1gcat min can take the place of domestic commonly used 10%pd/c; 3%pd/c≥75ml/0.1gact min can take the place of domestic commonly used 5%pd/c.) |
Ruthenium-carbon catalyst
| Metal content: 0.5%-10% |
Carrier: high purity active carbon |
Specific surface are: 1000-1300m2/g |
| Granularity: ≤200meshes(adjust according to specific conditions) |
Metal surface area: 55-70m2/g |
| Strength of particles: ≥85% |
Impurities: Fe, Cu, Ni, Ca etc. ≤0.3% |
| Nitro hydrogenation rate: (0.15M, 35°C, 1atm) (7%pd/c≥95ml/0.1gcat min can take the place of domestic commonly used 10%pd/c; 3%pd/c≥75ml/0.1gact min can take the place of domestic commonly used 5%pd/c.) |
| Metal content: 0.5%-10% |
Carrier: high purity active carbon |
Specific surface are: 1050-1500m2/g |
| Granularity: ≤200meshes(adjust according to specific conditions) |
Metal surface area: 60-70m2/g |
| Strength of particles: ≥85% |
Impurities: Cu, Fe, Cr, Ni, Al, Mg, Ca etc. ≤0.2% |
Platinum-Palladium carbon catalyst
| Metal content: Pt/pd=1/4 |
Carrier: high purity active carbon |
Specific surface are: 1000-1300m2/g |
| Granularity: ≤200meshes(adjust according to specific conditions) |
Metal surface area: 75-80m2/g |
Strength of particles: ≥85% |
| Selectivity: ≥75% |
Activity: ≥30g/h•g |
Impurities: Cu, Fe, Cr, Ni, Al, Mg, Ca etc. ≤0.2% |
We also provide noble metal compounds, such as palladium chloride, palladium oxide, platinum dioxide, ruthenium(IV)oxide etc. Pls. contact us if you're interested. |